Table of Contents
Advertisement
Using
the Active
A/V Network
Feature
This AN Network
is a special feature
that
makes it easier
to use
your television
and your other A/V components
together.
When
you connect
the AN Network,
you can point the remote
control
at
the television,
and it will "pass" the remote
control
command
to the
other components.
Additionally,
you will gain even more benefits
if you have a
Mitsubishi
VCR equipped
for the Active AN Network.
The Active
AN Network
allows you to perform
many of the commonly
used
features
of your system
at the press of just one button.
This section will explain
the various
features
of the Active AJV
Network.
before
you begin
You must have connected
an A/V Network
cable from the
Active AN Network
terminal
of your TV to the AN Network
IN
terminal
of your VCR.
See "TV+Mitsubishi
products
thaL have
AN Network
terminals,"
page 40.
•
You must have connected
your VCR to External
1 (EXT-1) of
your TV.
•
You must have set your TV's "AN Network"
setting
to "Active"
or "Basic".
See "Setting
the AN Network,"
page 60.
• Your VCR's remote
control
switch (if any) should be set to
"VCR-A."
•
Your VCR's video mute setting
should be turned
ON.
_>Importa_t:
what
the Active
AN Network
does
The Active AN Network makes
it easier and faster to use the
VCR's Quick Program
and Play commands
and the TV's PIP com-
mands.
When using the Active A/V Network,
you should
always point your
remote
control
at your television.
Using the Active A/V Network
Features
89
Advertisement
Table of Contents
