Table of Contents
Advertisement
TV+antenna
or cable
with
a decoder
box
equipment
you will need
Use this hook-up if you need a decoder box to descramble
cable
signals.
This hook-up will allow you to use the remote
control
to
change
channels.
(1) two-way
splitter,
and
3 lengths
of 75 ohm coaxial
cables.
procedure
(Please
see illustration
on the following
page.)
O Connect
the incoming
cable to the IN terminal
or. the two-way
splitter.
Connect
a coaxial cable to one of the OUT terminals
on the same
splitter;
connect
the other end of this cable to the ANT-A
terminal
on the back of the TV.
Connect
the second coaxial cable to the second OUT terminal
on
the same splitter;
connect
the other end of this cable to the IN
terminal
on the decoder
box.
O Connect
the third coaxial cable to the OUT "_erminal on the, back
of the decoder box, and the other end of this cable to the ANT-B
terminal
on the back of the TV.
30
Chapter
2 : Connecting
Your TV
Advertisement
Table of Contents
