Table of Contents
Advertisement
•
The CHANNEL
and number
buttons
(0-9) will automatically
control
the small PIP image.
You cannot
change
channels
on
the main image.
When you press the PIP button
on the remote
to turn off the PIP
image:
• CHANNEL,
the number
buttons,
and all other functions
will
work normally
again.
_>Important:
f>Important:
If you turn offthe
TV while it is set to EXT-1, it will return
to the
last channel
you viewed on Antenna-A
or Antenna-B
when you.
turn
the TV back on.
If you leave the TV turned
on, set to EXT-1, but the TV is. not
receiving
a signal on EXT-1, it will automatically
turn
off after five
minutes.
(If you use a TV menu during
this time, the TV will turn
offfive
minutes
after you stop using the menus.)
_Important:
You should
not press
the PIP button
while you are watching
a
channel
that
is not receiving
any broadcasts.
You will not be able
to see the small PIP image,
and you will not be able to change
channels
on the main image.
You may need to turn offl_he TV and
turn it back on, change
to a channel
that is receiving
a broadcast,
and begin again.
Using the Active A/V Network
Features
91
Advertisement
Table of Contents
