Using The Active A/V Network Feature - Mitsubishi CS-31505 Owner's Manual

Using the Active AN Network Feature
_>Important:
[>Important:
This A/V Network is a special feature that makes it easier to use
your TV and your other Mitsubishi A/V components together. When
you connect the A/V Network, you can point the remote control at
the TV, and it will "pass" the remote control command to the other
components.
Additionally, you will gain even more benefits if you have a
Mitsubishi VCR equipped for the Active A/V Network. The Active
A/V Network allows you to perform many of the commonly used
features of your system at the press of just one button.
This section will explain the various features of the
Active A/V Network.
before you begin
• You must have connected an A/V Network cable from the Active
A/V Network terminal of your TV to the A/V Network IN
terminal of your VCR. See "TV + Mitsubishi products that have
A/V Network terminals," page 36.
• You must have connected your VCR to Input i of your TV.
• You must have set your TV's "A/V Network" setting to ".Active"
or "Basic." See "Setting the A/V Network," page 58.
• Your VCR's remote control switch (if any) should be set to
"VCR-A."
• Your VCR's video mute setting should be turned ON.
what the Active AN Network does
The Active A/V Network makes it easier and faster to use the VCR's
Quick Program and Play commands and the TV's PIP commands.
When using the Active A/V Network, you should always point your
remote control at your TV.
A/V Network and Active A/V Network are only available with select
Mitsubishi products.
Using the Active AN Network Feature
93