And Functions - Mitsubishi CS-27405 Owner's Manual

Remote control buttons and functions (cont.)
(j_) select buttons
Use these buttons to select the component you wish to operate:
the TV, an audio component (in the CABLE layer), VCR-A or
VCR-B. These are also used to set up your _._emo_econtrol :for
your particular brand of VCR.
_audio and VCR buttons
These buttons can be used to control VCRs, cassette decks, CD
players, etc. These are pre-programmed to operate select
Mitsubishi components. As for the PLAY button, see "Using tlhe
Active A/V Network Feature," on page 89.
(_) power button (POWER)
Use to turn the TV on or off.
(_)mute control (MUTE)
Use to turn the sound off completely or restore it to its ori[,4nal
volume.
(_ super quick view button (SQV)
Press to view channels you have programmed into the super
quick view memory.
(_)quick view button (QV)
Press to switch to the channel you have stored into the quick
view memory.
(_volume control (VOLUME)
Press the top part of the button to turn up the volume; press the
bottom part of the button to turn down the volume.
(_) input button (INPUT)
Use to select the input source you wish to watch:
• Antenna A,
• Antenna B, or
• External 1 or 2.
C) channel control (CHANNEL)
Press the top part of the button to change to a channel with a
higher number; press the bottom part to change to a channel
with a lower number.
(_enter button (ENTER)
May be used after selecting a channel number or an item from
the on-screen menu system. Also use with the PIP function.
20 Chapter 1 : Getting to Know Your TV