Table of Contents
Advertisement
TV+ separate
UHF
and VHF
antennas
equipment
you will need
If UHF and VHF signals
are brought
into your home with two
separate
antennas,
you will need to combine
the antennas
into a
single wire to connect them to the TV.
To do this you will need a
UHF/VHF
combiner.
(There are different
combiners
for different
kinds
of leads.
Check with your local electronics
store for the kind
of combiner
you need.)
Pictured
below is a standard
combiner.
To connect
separate
UHF and VHF antennas
to your television:
O Connect
the antenna
leads to the UtIF/VHF
combiner.
O Press the combiner
onto the ANT-A terminsJ
on the television.
(
VHF Antenna
UHF Antenna
(Channels2-13)
(Channels14-69)
nil/
....... -
JFII
""""V
'i
Flat Twin Lead
External
Antenna
or Cable
71
300 Ohm to
75 Ohm
Flat Twin Lead -
_)
Combiner
0
Back
Side
I'V rear terminals
@
"®
@
EX-F-2
32
Chapter
2 : Connecting
Your TV
Advertisement
Table of Contents
