Mitsubishi CS-27405 Owner's Manual page 96

Troubleshooting (cont.)
Problems Possible Solutions
For More Information
The remote control doesn't
work.
• Check that the batteries are
installed correctly.
• Check the select button is
set to TV.
See "Getting ready to use
the reraote control" in
Chapter i for an explana-
tion of how to install batter-
ies in the remote control.
See "Remote control but:
tons and functions" in.
Chapter 1, which exp![ains
where the select button i,_
located.
Be sure that you are point-
ing the top of the remote
control toward the TV from
a distance of no more than
20 feet.
See "Cetting ready to use
the remote control" in
Chapter 1, which contains
pointers for using the
remote control.
The TV takes several sec-
onds to respond to button
commands.
Use the ENTER button to
avoid delays.
See "Changing channels" in
Chapter 3, which explains
the function of the ENTER
button.
You can't access a channel.
• Be sure that the channel
you want to view is pro-
grammed into memory.
• Check that the TV is tuned
to the correct input source
(antenna) for that channel.
See "Memorizing ch_mnels"
in Chapter 3, which explains
how to program channels
into the TV's memory.
See "Selecting the input
source" in Chapter 3, which
explains how to change the
input source.
94 Chapter 5: Troubleshooting