Tv+Mitsubishi Products That Have A/V Network Terminals - Mitsubishi CS-27405 Owner's Manual

TV+Mitsubishi products that have AfV Network
terminals
The AN Network is a special system that Mitsubishi developed to
make it easier to use the remote control. WherL the supplied cable.
is connected between two Mitsubishi products with tlhe AN Net-
work, you can point the remote control at one proctuct and it will
"pass" the remote control command to the other.
equipment you will need
• 1 AN network cable
(included with the TV).
:D
procedure
O Connect one end of an AN network cable to 1;he ACTIVE A[V
NETWORK terminal on the back of the TV.
O Connect the other end of this cable to the A/V NETWORK ][N
terminal on the back of a Mitsubishi compo_ ent that has A/V
network terminals.
You can now point your component remote (such as a VCR
remote) directly at the television. The AN cable will "pass" the
remote commands to the component.
[>Important: The method of connecting the AN network can change, depending
on which components you have and the way you plan to use your
equipment. More detailed information is contained in the owner's
guide of each particular Mitsubishi component.
40 Chapter 2 : Connecting Your TV