Changing The Light Bulb - Pfaff creative 2124 Owner's Manual

Changing the light bulb

Switch off the main switch.
• Disconnect the lead cord and the foot control plug from the
machine.
• Remove the accessory tray. The light bulb is located inside the
sewing machine near the needle threader.
Bulb removal
Push the bulb remover, as shown in the picture, up as far as it
will go. Now turn the bulb half a rotation counter clock-wise and
remove the bulb.
Insertion of the bulb
Insert the bulb in the lamp changer. Guide the bulb into the
diagonal holder and turn it until the pins of the bulb engage.
Push the bulb upward into the holder as far as it will go and
turn it half a rotation in a clock-wise direction. Remove the bulb
changer from the bulb, the bulb is held fi rmly.
Important: The maximum wattage of the bulb is 5 watts.
Bulbs can be purchased from your Pfaff dealer.
Maintenance
6:3