Attach The Hoop On The Embroidery Unit 3:5; Remove The Hoop - Pfaff creative 2124 Owner's Manual

Embroidery
Attach the hoop on the embroidery unit
The embroidery arm (47) must be rotated, because it is still
lying over the unit. Raise the embroidery arm in the area of the
recessed grip (46) and rotate it 90 degrees. The embroidery arm
will lock in embroidery position.
Pass the hoop underneath the embroidery foot by raising the
presser foot lifter as far as possible. The retaining screw of the
hoop must be facing you and the guide pin (50) must be point-
ing to the right.
Slide the hoop along the machine's metal guide (45) behind the
release lever (48), until the hoop locks in place.

Remove the hoop

To remove the hoop, push down the release lever (48) of the
embroidery unit and pull the hoop forwards and away. The
presser foot must be in the highest position.
3:5