Pfaff creative 2124 Owner's Manual page 26

Bobbin winding
Winding the bobbin from the spool pin
Place the sewing thread on the spool pin. Slide
a spool cap, slightly larger than the spool, fi rmly
against the spool. Three different spools caps
to accomodate any type of thread spool are
C
included with your machine. Choose a spool
cap that is the same size or slightly larger in
diameter than the spool.
Threading
Place the thread into guide A from the front
and pull it counter clockwise around the pre-
tension device B. Make sure the thread is pulled
B
securely inside the pre-tension device for cor-
A
rect thread tension. Pull the thread under the
thread guide C (from back to front). Wind the
thread tail around the bobbin several times in a
clockwise direction.
Turn on the machine.
Hold the end of the thread fi rmly and press the
foot control. As soon as the bobbin is full, the
winding action will stop automatically. Push the
bobbin to the left, cut the thread and remove
bobbin from the winder.
Note: If you want to wind a bobbin before you start to
embroider, you need to choose a design and a hoop in
order to be able to wind your bobbin.
2:8