Table of Contents
Advertisement
Embroidery
Rotating button
This function makes it possible to rotate a
design in 90° steps. When pressing the rotating
button (104) an arrow will be added inside the
hoop icon (A) to show how you have rotated
your design.
Note: If the design does not fi t in the hoop when you
have rotated it 90 °, it will automatically be turned
180°.
Positioning buttons
The positioning arrows (107) (A) makes it pos-
sible to move the design in 4 different direc-
tions in the hoop. If you have reached the limit
of your hoop, you will hear a beep.
If you want to go back to the original starting
position, press the design number again.
Note: If you want to change the design size, rotate or
mirror the design, it is best to do it before you move
the design. Otherwise the changes might be limited
by the hoop size.
A
Tie-off/basting button
If you press the tie-off/basting button (82)
before you start to embroider, you will activate
the basting stitch and the tie-off/basting icon
(A) will be shown on the window. The machine
will then baste a square, outlining the design
area.
The basting function can be useful when work-
ing with fabrics that can not be hooped tightly.
You can then use the basting function to baste
the fabric and stabilizer together.
3:9
Hide quick links:
Advertisement
Table of Contents
