Pfaff creative 2124 Owner's Manual page 61

Sewing
Stitch width
Change the stitch width by pressing the + and
- buttons (86). The stitch width can be changed
in 0.5 mm steps, from 0 mm to 6.0 mm. When
you have reached the limit you will hear a beep.
Stitches 1, 2 and 11 are side position stitches.
This means that you can use the + and - buttons
to change the needle position of these stitches.
If you have changed the preset value of one
of these stitches, you will see an arrow in the
window pointing in the direction you have
chosen.
Stitch length
To change the stitch length press the + and
- buttons (84). The length for normal stitches
can be changed in 0.5 mm steps from 0-6 mm.
For satin stitches (no 39 to 50) you can change
the stitch density length in 0.1 mm steps from
0-1.5 mm.
When you have reached the limit you will hear
a beep.
Thread tension
Press the + and - buttons (88) to change the
thread tension. To read more about thread
tension see page 2:17.
When you have reached the limit you will hear
a beep.
4:5