The Feed Dog; Changing The Needle - Pfaff creative 2124 Owner's Manual

The feed dog

B
For certain sewing work such as free-motion
quilting or darning or when embroidering, the
A
feed dog must be lowered. On your Pfaff cre-
ative 2124 there are two different methods for
lowering the feed dog, one on the outside of
the machine and one inside the bobbin door.
For either method:
Raise the presser foot before lowering the feed
dog. Push slide A or B to the left.
A
To bring the feed dog back up move the slide to
the right.
B

Changing the needle

Switch off the main switch.
To remove: Lower the presser foot and set
the needle to its highest position. Loosen the
A
needle screw and pull the needle out down-
wards.
To insert: The fl at side A of the needle must
face to the rear. Lower the presser foot and
insert the needle, pushing it up as far as it will
go. Hold the needle and tighten the needle
screw fi rmly.
2:6