Pfaff creative 2124 Owner's Manual page 62

Balancing buttonholes
You can also use the stitch length buttons for
balancing a buttonhole. By keeping the single
pattern/monochrome button (89) depressed
for 1 second when a buttonhole is selected, the
balancing icon (A) will appear on your window
and a balance value will replace the stitch
length. With the length + and - buttons you can
change the stitch density of your buttonhole.
To switch off the balancing function, press the
single stitch button again. The balancing icon
disappears and the stitch length is shown again.
Note: The selected balace value is active until another
stitch is selected.
The control panel of the machine: stitch/
design selection buttons
On your Pfaff creative 2124 you can choose
between 52 different stitches. To choose a
stitch, press the direct selection buttons on your
keypad. For stitches with a two-fi gure number,
for instance stitch 25, press 2 and 5 right after
each other. The number will be shown on the
window (A).
4:6