Inserting The Bobbin And Bobbin Case - Pfaff creative 2124 Owner's Manual

Inserting the bobbin and bobbin case

Switch off the main switch.
Open the bobbin door at the left side swinging it open towards
the front.
Lift the latch of the bobbin case and pull the bobbin case out of
the machine. Release the latch and take the empty bobbin out of
the bobbin case.
Inserting the bobbin
Insert the full bobbin in the bobbin case. When doing so, pull the
thread through slot A, then under tension spring B until it rests
in the opening (see arrow).
Check: When you pull the thread, the bobbin must turn clockwise.
Inserting the bobbin case
Lift latch E and push the bobbin case fully onto pin C of the
sewing hook. Opening D of the bobbin case must face upwards.
Check: Pull the bobbin thread sharply. The bobbin case must not fall out of the
hook.
Preparations Preparations
2:11