Removing / Inserting The Bobbin Case; Inserting The Bobbin Case / Adjusting The Bobbin Thread Tension - Pfaff 487 Instruction Manual

9

Removing / inserting the bobbin case

.03
1
Fig. 9 - 03
9

Inserting the bobbin case / adjusting the bobbin thread tension

.04
Fig. 9 -04
2
1
Switch off the machine!
Risk of injury due to accidental
machine start-up!
Removing the bobbin case:
O Tilt machine backwards.
O Raise the lever 1 and remove the bobbin
case 2.
Inserting the bobbin case:
O Press the bobbin case 2 until you feel it
snap into the bobbin case base.
Return the machine to its
upright position using both
hands!
Danger of injury by crushing
between the machine and the
table top!
Switch off the machine!
Risk of injury due to accidental
machine start-up!
O Insert the bobbin as shown in Fig. 9 - 04
O When the thread is drawn off, the bobbin
must turn in the direction shown by the
arrows.
O Adjust the thread tension by turning the
screw 1.
Set-up
29