Xm-2X And Xm-2Xr Leds - Extreme Networks 12800 Series Hardware Installation Manual

Figure 11: XM-2X I/O Module
Module status 10 Gbs ports
LEDs
Figure 12: XM-2XR I/O module
Module status
LEDs
NOTE
Although the XM-2X module and the XM-2XR module are similar in appearance, the functionality of each I/O module
varies. The XM-2XR module is part of the R series and includes the rate limiting feature; the XM-2X module does
not support rate limiting.
To use rate limiting, you must install the MSM-5R plus the GM-20XTR I/O module and/or the XM-2XR I/O module.
The XM-2X module and XM-2XR module have two unpopulated XENPAK-based 10 Gigabit Ethernet
ports.
The default configuration of the XM-2X and XM-2XR I/O modules is as follows. All ports:
Are added to the default VLAN as untagged.
●
Inherit the properties of the default VLAN (for example, protocol type and VLANid).
●

XM-2X and XM-2XR LEDs

The XM-2X module and XM-2XR module have the following LEDs:
Module status
●
Module diagnostics
●
Port status
●
BlackDiamond 12800 Series Switches Hardware Installation Guide
10 Gbs ports
BlackDiamond 12800 Series I/O Modules
EX_155h
EX_156h
27