Extreme Networks 12800 Series Hardware Installation Manual page 127

7 Slide the top of the BlackDiamond shipping carton down and over the BlackDiamond 12804 chassis
(see Figure 82).
Figure 82: Replacing the Carton over the BlackDiamond 12804 Chassis
Place box
over
chassis
8 Insert the clip locks (see
a Place your thumb and index finger inside the clip lock touching the prongs.
b Squeeze the prongs inward, applying equal pressure on each side.
c Push the prongs inward until the clip lock is secured onto the carton.
Repeat steps 8a through 8c to insert each of the remaining clip locks.
CAUTION
Proper installation of the clip locks is critical for safe shipment of the BlackDiamond 12804 chassis. Make sure that
the clip locks are secure and accurately installed.
Figure 83: Clip Locks on the BlackDiamond 12804 Chassis Shipping Carton
Squeeze prongs
to unlock
Clip lock
BlackDiamond 12800 Series Switches Hardware Installation Guide
Figure 83).
Repacking the BlackDiamond 12804 Chassis
Insert & close
4 clip locks
to secure box
ASP016a
EX_121
Open
lock
EX_111A
127