B
Technical Specifications
This appendix includes the following technical specifications:
BlackDiamond 12804 Switch on page 147
●
BlackDiamond 12802 Switch on page 149
●
Power Supplies for the BlackDiamond 12800 Series Switches on page 151
●
Connector Pinouts on page 153
●
NOTE
The power supply specifications for the BlackDiamond family of switches are consolidated into one table:
BlackDiamond 12804 Switch
Table 24: BlackDiamond 12804 Switch Technical Specifications
Physical Dimensions
BlackDiamond 12804 chassis
Weight
BlackDiamond 12804 chassis
(empty)
BlackDiamond 12804 chassis
(fully loaded)
BlackDiamond 12804 power
supply
BlackDiamond 12804 fan tray
BlackDiamond 12804 PSU/Fan
Controller
Safety Standards
North American Safety of ITE
European Safety of ITE
International Safety of ITE
BlackDiamond 12800 Series Switches Hardware Installation Guide
Height: 17.47 inches (44.4 cm)
Width: 17.51 inches (44.5 cm)
Depth: 18.12 inches (46.0 cm)
63.75 lb (29.0 kg)
153 lb (69.5 kg)
7 lb (3.2 kg)
4.75 lb (2.2 kg)
1.75 lb (.79 kg)
UL 60950-1:2003 1st Ed., Listed Device (US)
CSA 22.2#60950-1-03 1st Ed.(Canada)
Complies with FCC 21CFR 1040.10 (US Laser Safety)
CDRH Letter of Approval (US FDA Approval)
NOM/NYCE (Mexico)
IEEE 802.3af 6-2003 Environment A for PoE Applications
EN 60950-1:2001+A11
EN 60825-1+A2:2001 (Lasers Safety)
TUV-R GS Mark by German Notified Body
73/23/EEC Low Voltage Directive
CB Report & Certificate per IEC 60950-1:2001 Country Deviations
AS/NZX 60950-1 (Australia /New Zealand)
Table
26.
147