Unpacking The Blackdiamond 12802 Chassis - Extreme Networks 12800 Series Hardware Installation Manual

Installing the BlackDiamond 12800 Series Chassis
Figure 32: Securing the BlackDiamond 12804 Chassis to a Rack
EX_171A
8 Remove the helper bracket from the system rack after the chassis is secured. Save the bracket for
future use if you remove the chassis from the rack.

Unpacking the BlackDiamond 12802 Chassis

CAUTION
Proper lifting of the BlackDiamond 12802 chassis requires two people.
To unpack the BlackDiamond 12802 chassis:
1 Break the inspection seal and cut the packing tape on the top of the shipping carton.
2 Open the top of the carton and remove the documentation pack (see Figure 33).
3 Remove the packing foam on top of the chassis (see Figure 33).
4 At the side of the chassis, remove the package of mounting brackets and hardware (see Figure 33).
64
BlackDiamond 12800 Series Switches Hardware Installation Guide