Language Settings - Denon DVD-900 Operating Instructions Manual

• Press Ihe _1 button to go to the next upper hierarchy;
• If the entire program cannot be displayed a/once on
the screen, "V" appears to go to the next page,
3 WB6',_tbe disc Ba b÷÷_ price, rammed,
press
the PLAY bu_to[_.
• Programmed play starts.
E2K3
Notes
• Press the CLEAR button, and the last-programmed
entry will be deleted.
• Press the RETURN button, and the STOP screen
will show up with the program coments in memory,
• The program setting will be cancelled when the
power is turned off or the disc tray is oImned,
The DVD player has a function which allows you to
select the desired audio language and sound mode,
For D VDs
Press/:be AUO0 I!g_£f{}li_ dulr _g is ayba R_airedthe__
p_ess the AUF}IiOba_on o 5eHect be desined a_do
• The audio language can be changed if multiple
languages are recorded on the DVD being played,
For audio CDs
Press t_e AUDIO b_t_ ®_ dal[ng pHayl!gack
• Pressing the AUD|O button cycles the sound mode
through STEREO, L-CH and R-CH,
Both right and left channeJs
are active (stereo)
Only the left channel
is active
Only the right channel
is active
Notes
• Pressing the Audio button may not work on some
DVDs with multiple audio languages (e,g. DVDs
which allow audio language setting on the disc
menu), Opera/ion varies between discs, so refer to
the manual accompanying the disc,
• Current audio language and sound mode will be dis-
played when you press the AUDIO button at first,
• If a desired language is not shown after pressing the
Audio button several times, the disc does not have
an audio source in that language.
• The audio language resets to the one which has been
selected in the setup mode, every time the power is
turned on or discs are replaced. If that language is
not available on a disc, a language defined by the
disc is selecte&
• The screen display will disappear after about 5
seconds,
22