Oven Door; Burner Components - Kenmore 911.36769 Owner's Manual

PAR con, .ue
TO REMOVE:
Open the door to the broil
stop position. Grasp the
door on each side and lift
up and off the hinges., DO
NOT LIFT THE DOOR
BY THE HANDLE.
y t
TO REMOVE:
Be sure that all controls are turned off and that
the unit is cool Lit off bumer grate, bumer cap
and burner head. Do not remove burner bow!.
_,q_--,-_ BURNER CAP
_ _,_ BURNERHEAD
MIXER TUBE
BURNER _ _ SPARK IGNITER
%
__..._'_" MIXER TUBE
(CHIMNEY)
TO REPfLACE:
Remove the paper
towel rolls or towels.
Make sure the hinges
are still in the broil stop
position. Grasp the
door on each side. Lift
the door over each
hinge. Line the slots
at the bottom of the
door with the hinges r
Slide the door down
over the hinges as far
as it will got
, , ,=H,I ,,
The electrode of the spark
igniter is exposed beyond
the top of the burner.
When cleaning the burner
bowl, be careful not to
snag the electrode of the spark igniter
with your cleaning cloth. Damage to the
igniter could occur. Be careful not to
turn on any cooktop controls while
cleaning burner bowls. A slight
electrical shock might result, which could
cause you to knock over hot cool(ware.
TO REPLACE:
Place the burner head onto the burner bowl
making sure the location of the spark igniter
matches up with the opening in the burner
head
Place the burner cap on the bumer head
Place the grate over the burner assemb(y and
onto the burner bowl The indentations of the
bowl should match the location pins on the
bottom of the grates
26 removable parts continued