Control Lockout; Cook And Hold Arrow Speed Change - Kenmore 911.36769 Owner's Manual

FEATURES o on,,n .
Your control will allow ,you to lock down the
touch pads so they cannot be activated when
pressed, If you're worried about leaving the
oven unsupervised, activate this feature in
both ovens,
t. Press and hold, at the same time, the
BAKE and BROIL pads for 3 seconds,
until the display shows St:,
2. (a) Press the CLEAN pad. The display
shows LOO OFF (lockout off)°
(b) Press the CLEAN pad again The
display wifl show LOC ON (lockout on)
3. Press the START pad,
This feature can only be set when the
oven is not in use.
When this feature is on, the display will show
LOC, if a touch pad is pressed (This feature
will not affect the Clock, Timer or Oven light
pads).
This special feature will allow ,you to change
the speed, #1 means speed of change is slow
up to #5 which means speed of change is fast
To set the speed you prefer, follow these
steps:
1. Press and hold, at the same time, the
BAKE and BROIL pads for 3 seconds,
until the display shows SF,
2. Press the UP arrow pad, The display will
show the current set speed,
3. Press the UP arrow to increase the speed
up to the number 5,
or
Press the DOWN arrow pad to decrease
the speed down to the number 1_
4. Press the START pad
Your new control has a cook and hold feature
for timed cooking only?ha t witl keep hot cooked
foods warm up to 3 hours after the timed
cooking is finished To activate this feature
1. Press and hold, at the same time, the
BAKE and BROIL pads for 3 seconds,
until the display shows SF.
2. (a) Press the OVEN COOKING TIME
pad. The display will show HLd OFF,
(b) Press the OVEN COOKING TIME
pad agaEn to activate the feature, The
display will show NLd ON.
3. Press the START pad
You will need to set this feature separately for
each oven,
22