GE WCVH4800K Owner's Manual & Installation Instructions page 15

Installation Instructions
UNPACKING THE WASHER
_Zl W AR NING:
Recycle or
destroy the carton
and plastic bags after the washer is unpacked. Make
materials inaccessibleto children. Children might use
them for play. Cartons covered with rugs, bedspreads
or plastic sheets can become airtight chambers causing
suffocation.
1. Cut and remove all packaging straps.
2. While it is in the carton, carefully lay the washer on its
side. DO NOTlay the washer on its front or back.
3. Turn down the bottom flaps. Remove all base packaging
including the styrofoam base.
4. Carefully return the washer to an upright position and
remove the carton by lifting it upward.
5. Carefully move the washer to within 4 feet (122cm)
of the final location.
6. Remove the following from the back side of the washer:
4 bolts
4 plastic spacers (including rubber grommets)
Do not remove
screw or clip
UNPACKING THE WASHER Icont,}
7. Insert shipping bolt hole covers into shipping bolt holes.
©
s
©
NOTES:
. Failure to remove the shipping braces can cause
the washer to become severelg unbalanced.
. Save all bolts for future use.
. If you must transport the washer at a later date, you must
reinstall the shipping support hardware to prevent shipping
damage. Keep the hardware in the plastic bag provided.
15