Taking _ Pictures In Auto Mode - FujiFilm FINEPIX REAL 3D W3 Owner's Manual

Taking _ Pictures in Auto Mode
This section describes how to take _ pictures in I_ (auto) mode.
1 Turn the camera on,
Fully open the lens cover.
2 Rotate the mode dial to I_1,
will be displayed
in the monitor and the
mode indicator will
light.
iiiiiiiiiiiiiiiiiii
mmmmmmi
mmmmmmi
mmmmmmi
mmmmmmi
mmmmmmi
mmmmmmi
mmmmmmi
mmmmmmi
mmmmmmi
mmmmmmi
mmmmmmi
mmmmmmi
mmmmmmi
mmmmmmi
mmmmmmi
mmmmmmi
mmmmmmi
" ii_ mmmmmmi
Parallax(pg. 101)
Tile appearance of _ images
carl be adjusted using tile (30
control (pg. 2). The percent-
age is displayed in the monitor.
Press the shutter button to take
picture at the current setting,
or press tile 3D button twice to reset parallax.
Note that adjusting parallax re-
duces
t orizontal frame cover-
age. Tile new crop is shown by
black borders tt e d splay.
Tip:Auto Parallax
automatic parallax adjustment, select ON for
[] AUTO PARALLAX CONTROL (pg. 62). Parallax
canstill be adjustedmanually when ON isselected.
[_ Caution:Excessive Parallax
Too much parallax may make it impossible to per-
ceive the 3D effect•