Viewing Pictures On A Computer; Installing The Software - FujiFilm FINEPIX REAL 3D W3 Owner's Manual

Viewing Pictures on a Computer
The supplied software can be used to copy pictures to a computer, where they can be stored, viewed,
organized, and printed. Before proceeding, install the software as described below. Do NOT connect the
camera to the computer until installation is complete.
Installing the Software
1
Confirm that the computer meets the following system requirements:
Windowsf Windows Vista _ Windows XP"
CPU 3 GHz Pentium 4 or better t 2 GHz Pentium 4 or better t
RAM I GB or more 512 MB or more t
Free disk space 15 GB or more 2 G B or more
Video 1024 x 768 pixels or more with 24-bit color or better
A graphics processing unit (GPU) that supports DirectX 7 or later
Built-in USB port recommended. Operation is not guaranteed with other USB ports.
Other Internet connection (broadband recommended) required to install .N ET Framework (if necessary), to use
auto update feature, and when performing such tasks as sharing pictures online or via e-mail.
Other versions of Windows are not supported. Only pre-installed operating systems are supported; operation is not
guaranteed on home-built computers or computers that have been upgraded from earlier versions of Windows.
t 2.4GHz Core Duo 2 or better recommended when viewing _ HD movies.
t 1 GB or more recommended when viewing _ HD movies.
2 Start the computer. Log in to an account with administrator privileges before proceeding.
o