[] White Balance; [] Continuous - FujiFilm FINEPIX REAL 3D W3 Owner's Manual

Hide thumbs Also See for FINEPIX REAL 3D W3:
Table of Contents

Advertisement

U<_ing the*M<*nu_;: .!;hooting Hod<*
[]
WHITE BALANCE
For natural colors, choose a setting that matches
the light source (for an explanation
of "white bal-
ance," see the Glossary on page 101).
Option
Description
AUTO White balance adjusted automatically.
"÷:- For subjects in direct sunlight.
-:_
For subjects in the shade.
Use under "daylight" fluorescent lights.
Use under "warm white" fluorescent lights.
Use under "cool white" fluorescent lights.
-6,.- Use under incandescent lighting.
I_
For underwater subjects in an aquarium.
If AUTO does not produce the desired results (for
example, when taking close-ups), choose the op-
tion that matches the light source.
_- Notes
• Auto white balance is used with the flash. Turn the
flash off (pg. 35)to take pictures at other settings.
• Resultsvary with shooting conditions. Play pictures
back after shooting to check colors in the monitor.
[]
CONTINUOUS
Capture motion in a series of pictures.
• _
TOP40(HIGH SPEED): The camera takes up to 40
pictures at high speed while the shutter button
is pressed. Not available in !_1"_!.
• _ TOP40: The camera takes up to 40 pictures
while the shutter button is pressed.
• OFF: T he camera takes one picture each time the
shutter button is pressed.
_-- Notes
• Tile flash turns off automatically. Tile previously-se-
lected flash mode is restored when OFF is selected
for [] CONTINUOUS.
• Frame rate varieswith shutter speed.
66

Advertisement

Table of Contents
loading

Table of Contents