FujiFilm FINEPIX REAL 3D W3 Owner's Manual page 67

Hide thumbs Also See for FINEPIX REAL 3D W3:
Table of Contents

Advertisement

Printing Pictur_{_s v#_ LL B (_
Only)
%.Tip:Printing theDateof Recording
To print the date of recording on pictures, press DISP/
BACK in steps 1-2 to display tile PictBridge menu (see
"Printing the DPOFPrint Order," below). Pressthe se-
lector up or clown to highlight PRINT WITH DATE E'_
and press MENU/0K to return to the PictBridge display
(to print pictures without tile date of recording, select
PRINTWITHOUT DATE).To ensure that the date is cor-
rect, set the camera clock before taking pictures. Note
that the PRINT WITH DATE E'_option is only available
with printers that support date printing.
%, During Printing
Tile message shown at right is
displayed during printing. Press
DISP/BACK to cancel before all
pictures are printed (depending
on the printer, printing may end
before the current picture has printed).
If printing is interrupted, press [] to turn tile camera
offand then on again.
Confirm that tile above messageis not displayed and
turn the camera off. Disconnect the USBcable.
o
51

Advertisement

Table of Contents
loading

Table of Contents