FujiFilm FINEPIX REAL 3D W3 Owner's Manual page 7

•Do n ot store batteries inwarm or
humid places
•Keep the b atteries out ofreach of
babies and small children
•Make sure that the b attery polarity
((+_, and _b') is correct
•Do n ot use n ew w ith u sed batter
ies Do not use c harged and d is
charged batteries together
•Do not u se d ifferent types or
brands ofbatteries atthe same
time
•Ifyou do not intend touse t he
camera for a long p eriod of t ime,
remove the batteries from the
camera Note ifthe camera is left
with the batteries removed, the
time and date settings are c leared
•The b atteries feel warm right aft
ter b eing used Before removing
the batteries, turn t he c amera off
and w ait for t he batteries tocool
down
•Since batteries do not work well in
cold w eather orlocations, warm
the batteries by placing them i n
side y our garments before use
Batteries do not work well when
cold T hey will work again when
the t emperature returns to normal
•Boil (such as fingerprints) on the
battery terminals makes the bat
reties charge less reducing the
number ofimages, Carefully wipe
the battery terminals with a soft
dry c loth before loading
z_lf any liquid atall leaks from
the b atteries, wipe the b attery
compartment thoroughly and
then load new b atteries
z!_,X If a ny battery fluid comes into
contact with your hands or
clothing, flush the area thor
oughly with w ater Note that
battery fluid c an c ause loss
ofeyesight ifitgets into y our
eyes Ifthis occurs, do not rub
your eyes Flush the f luid out
with c lean water and contact
your physician for t reatment
•
Usingthe AA-size Ni-MH batteries
correctly
• NiMH batteries left unused in
storage for long periods can be
come "deactivated" Also, repeat
edly charging Ni MH batteries
that are only partially discharged
can cause them to suffer from the
"memory effect" Ni MH batteries
that are "deactivated" or affected
by "memory" suffer from the prob
lem of only providing power for a
short time after being charged, To
prevent this problem, discharge
and recharge them several times
using the camera's "Discharging
rechargeable batteries" function
Deactivation and memory are spe
ciflcto Ni MH batteries and are not
in fact battery faults
See Owner's Monuo/for the proce-
dure for "Discharging rechargeable
batteries"
_CAUTION
Do not use the "Discharging re
chargeable batteries" function when
alkaline batteries being used
• To charge Ni MH batteries, use the
quick battery charger (sold sepa
rately), Refer to the instructions
supplied with the charger to make
sure that the charger is used cor
recfly
• Do not use the battery charger to
charge other batteries
• Note that the batteries feel warm
after being charged
• Due to the way the camera is con
structed, a small amount of current
is used even when the camera is
turned off, Note in particular that
leaving NiMH batteries in the
camera for a long period will over
discharge the batteries and may
render them unusable even after
recharging
• Ni MH batteries will self discharge
even when not used, and the time
for which they can be used may be
shortened as a result
• Ni MH batteries will deteriorate
rapidly if over discharged (eg,
by discharging the batteries in a
flashlight) Use the "Discharging re
chargeable battedes"function pro
vided in the camera to discharge
the batteries
• Ni MH batteries have a limited
service lif_, If a battery can only
be used for a short time even after
repeated discharge charge cycles,
it may have reached the end of its
service life
• Disposingof Batteries
• When disposing of batteries, do
so in accordance with your local
waste disposal regulations
• A(Power Adapter
Always use the AC Power Adapter
with the camera The use of an AC
Power adapter other than FUJIFILM
AC Power Adapter can be damaged
to your digital camera
For details on the AC power adapter,
refer to the Owner's Monuo/of your
camera
• Use the AC power adapter for in
door use only
• Plug the connection cord plug se
curdy into the DC input terminal,
• Turn off the FUJIFILM Digital cam
era before disconnecting the cord
from the DC input terminal To dis
connect, pull out the plug gently
Do not pull on the cord,
• Do not use the AC power adapter
with any device other than your
camera
• During use, the AC power adapter
will become hot to the touch This
is normal
vii