Zoom G5 Operation Manual page 61

#14 ChaosDLY This chaos effect uses filter and echo.
Chaos
Page01
Sets the depth of the filter and echo. Sets the echo time.
FltOs
Page02
Sets the minimum frequency of the filter.
#15 Starship This effect makes a sound like a flying spaceship.
Accel
Page01
Sets the "acceleration" of the sound
by changing the sample rate.
Reso
Page02
Sets the strength of the resonance
of the effect.
#16 RNDM Talk This talking effect changes vowel sounds at random.
Speed
Page01
Sets the speed of vowel sound
change.
This fuzz effect feeds back overtones when single notes are played.
#17 FuzzyBack
The feedback sound is sustained when the Z-Pedal is shifted all the way to the right.
Gain
Page01
Sets the gain.
Depth
Page02
Sets the depth of the gain when the
pedal is pressed.
#18 Granular This effect freely granulizes the sound that is sampled regularly.
Size
Page01
Sets the fineness of the grains.
FltOs
Page02
Sets the minimum frequency of the
filter.
#19 SpaceWorm This ring modulator creates a spacey sound.
Freq
Page01
Sets the frequency of the ring
modulator.
Step
Page02
Sets the number of steps in the step
waveform.
#20 Custom Use this to control the parameters of other effects using the Z-Pedal.
ZP-V : DEST
Page01
Sets the parameter controlled by
vertical movement of the Z-Pedal.
ZP-L : DEST
Page02
Sets the parameter controlled by left
movement of the Z-Pedal.
ZP-R : DEST
Page03
Sets the parameter controlled by
right movement of the Z-Pedal.
Knob1
0–100 P Time
0–100
Knob1
0–100 P Power
Sets the "power" by changing the
balance of the sound.
0–100 VLCTY
Sets the speed of the sound change.
Knob1
x2– P Voice
Sets the quality of the voice.
Knob1
0–100 P HRMNX
Sets the amount of feedback of the
overtones.
0–100
Knob1
0–100 P Flt
Sets the amount of filter applied.
0–100 FltRs
Sets the strength of the filter
resonance.
Knob1
0–100 P Speed
Sets the speed of the step
waveform.
2–32 Level
Sets the output level.
Knob1
ZP-V : min
Sets the value when the pedal is all
the way up.
ZP-L: Left
Sets the value when the pedal is all
the way left.
ZP-R : Center
Sets the value when the pedal is in
the center position.
Knob2
x2– P Level
Sets the output level.
Knob2
0–100 P Level
Sets the output level.
0–10
Knob2
0–100 P Level
Sets the output level.
Knob2
0–100 P Level
Sets the output level.
Knob2
L100–R100 P Rate
Sets the sampling frequency. When
set to Hold, the sound is sampled
when picking occurs.
0–100 Level
Sets the output level.
Knob2
x9– P Depth
Sets the depth of the ring
modulation.
0–150
Knob2
ZP-V : max
Sets the value when the pedal is all
the way down.
ZP-L : Center
Sets the value when the pedal is in
the center position.
ZP-R : Right
Sets the value when the pedal is all
the way right.
Knob3
0–150
Knob3
0–150
Knob3
0–150
Knob3
0–150
Knob3
x2– , Hold
0–150
Knob3
0–100
Knob3
61