Zoom G5 Operation Manual page 41

006 ZNR ZOOM's unique noise reduction cuts noise during pauses in playing without affecting the tone.
THRSH
Page01
Adjusts the effect sensitivity.
Page02
007 NoiseGate This is a noise gate that cuts the sound during playing pauses.
THRSH
Page01
Adjusts the effect sensitivity.
Page02
008 DirtyGate This vintage style gate features a characteristic way of closing.
THRSH
Page01
Adjusts the effect sensitivity.
Page02
009 GraphicEQ This unit has a six band equalizer.
160Hz
Page01
Boosts or cuts the low (160 Hz) frequency
band.
3.2kHz
Page02
Boosts or cuts the high (3.2 kHz)
frequency band.
Level
Page03
Adjusts the output level.
010 ParaEQ This is a 2-band parametric equalizer.
Freq1
Page01
Adjusts center frequency of EQ1.
Freq2
Page02
Adjusts center frequency of EQ2.
Level
Page03
Adjusts the output level.
011 Exciter Adjusts the depth of the compression.
Bass
Page01
Adjusts the amount of low-frequency
phase correction.
Page02
This effect uses the comb filter that results from fixing the modulation of the flanger like
012 CombFLTR
an equalizer.
Freq
Page01
This sets the emphasized frequency.
HiDMP
Page02
Adjusts the treble attenuation of the
effect sound.
Knob1
1–25 P DETCT
Sets control signal detection level.
Knob1
1–25 P Level
Adjusts the output level.
Knob1
1–25 P Level
Adjusts the output level.
Knob1
-12–12 400Hz
Boosts or cuts the low-middle (400
Hz) frequency band.
-12–12 6.4kHz
Boosts or cuts the extremely high
(6.4 kHz) frequency band.
0–150 P
Knob1
20Hz–20kHz Q1
Adjusts EQ1 Q.
20Hz–20kHz Q2
Adjusts EQ2 Q.
0–150 P
Knob1
0–100 Trebl
Adjusts the amount of high-frequency
phase correction.
Knob1
1–50 P Reso
Adjusts the intensity of the resonance
sound of the effect.
0–10 Level
Adjusts the output level.
Knob2
GtrIn, EfxIn Level
Adjusts the output level.
Knob2
0–150 P
Knob2
0–150 P
Knob2
-12–12 800Hz
Boosts or cuts the middle (800 Hz)
frequency band.
-12–12 12kHz
Boosts or cuts the harmonics (12
kHz) frequency band.
Knob2
0.5, 1, 2, 4, 8, 16 Gain1
Adjusts EQ1 gain.
0.5, 1, 2, 4, 8, 16 Gain2
Adjusts EQ2 gain.
Knob2
0–100 Level
Adjusts the level of the signal after it
has passed through the module.
Knob2
-10–0–10 P Mix
Adjusts the amount of effected sound
that is mixed with the original sound.
0–150 P
Knob3
0–150 P
Knob3
Knob3
Knob3
-12–12
-12–12
Knob3
-12–12
-12–12
Knob3
0–150 P
Knob3
0–100 P
NEXT
41