Zoom G5 Operation Manual page 60

Z-Pedal Effect Types and Parameters
#7 TalkPDL-Z
#8 TRM&PHSR
#9 CHO&REV
#10 FLNG&DLY
#11 OctPitch
#12 W-Shift
#13 HotSpice This effect simulates a sitar tone.
60
This effect can make a guitar sound like a human voice.
Knob1
VPosi 0–100
Sets the starting position value.
Page01
After the pedal is moved, the actual
position value is used.
Mode Step,Soft
Page02
Sets how vowel sounds change.
This effect allows the pedal to be used for tremolo when shifted left and phaser when
shifted right.
Knob1
Depth L100–R100
Page01
Sets the depth of the effect.
UP 0–UP 9,
Wave DWN 0–DWN 9,
TRI 0–TRI 9
Page02
Selects the waveform used for
tremolo modulation.
This effect allows the pedal to be used for chorus when shifted left and reverb when
shifted right.
Knob1
Depth L100–R100
Page01
Sets the depth of the effect.
RevMx 0–100
Page02
Sets the reverb mix.
This effect allows the pedal to be used for flanging when shifted left and delay when
shifted right.
Knob1
Depth L100–R100
Page01
Sets the depth of the effect.
FlgDp 0–100
Page02
Sets the depth of the flanger.
Level 0–150
Page03
Sets the output level.
This effect, which is designed for playing single notes, allows the pedal to be used to change
the pitch by up to -1 octave when shifted left and up to +1 octave when shifted right.
Knob1
Pitch L100–R100
Page01
Sets the amount of pitch shift.
This effect, which is designed for playing single notes, allows the pedal to control pitch and vibrato.
Knob1
Pitch 0–200
Page01
Sets the amount of pitch shift.
Rate 0–100
Page02
Sets the vibrato speed.
Knob1
Sitar 0–100
Page01
Sets the balance between the sitar
sound and the original sound.
Reso -10–10
Page02
Sets the strength of the resonance motion. Sets the buzzing tone.
Level 0–150
Page03
Sets the output level.
Knob2
P HPosi 0–100
Sets the starting position value.
After the pedal is moved, the actual
position value is used.
Tone 0–10
Sets the tone.
Knob2
P TrmRt – x20
Sets the rate of the tremolo.
4 STG , 8 STG ,
Color
inv 4 , inv 8
Sets the type of phaser color.
Knob2
P ChoRt 1–50
Sets the rate of the chorus.
Level 0–150
Sets the output level.
Knob2
P FlgRt 0–50
Sets the rate of the flanger.
DlyFB 0–100
Sets the feedback of the delay.
Knob2
P Tone 0–10
Sets the tone.
Knob2
P VIBRT 0–100
Sets the amount of vibrato applied.
Depth 0–100
Sets the vibrato depth.
Knob2
P PitMx 0–100
Sets the volume of doubling one
octave up.
Buzz 0–100
Knob3
P Voice 0–100
Sets the voice quality.
Level 0–150
Sets the output level.
Knob3
PhaRt – x20
Sets the rate of the phaser.
Level 0–150
Sets the output level.
Knob3
Decay 1–30
Sets the length of the decay.
Knob3
DlyTm 1–2000
Sets the delay time of the delay.
DlyMx 0–100
Sets the delay mix.
Knob3
Level 0–150
Sets the output level.
Knob3
P Level 0–150
Sets the output level.
Tone 0–10
Sets the tone.
Knob3
P Input GtrIn,EfxIn
Selects the source of the input signal
used for the sitar effect.
Sense 0–100
Sets the sensitivity of the effect.