Zoom G5 Operation Manual page 5

GLOBAL key
CONTROL
IN jack
USB jack
FP01/FP02
FS01
Z-Pedal
POWER (eco) switch
ZOOM AD-16 AC adapter
TUBE BOOSTER
BOOST knob
TONE knob
TUBE BOOSTER
switch
DC9V
AC adapter
connector
Computer
ACTIVE/PASSIVE switch
Use this switch to set the input type.
Set this to "ACTIVE" (pushed in) if
you have an effect pedal connected
between your instrument and the
or you are directly connecting a guitar
with active pickups.
Set this to "PASSIVE" (not pushed
in) if you are directly connecting a
guitar with passive pickups.
PRE/POST switch
Use this switch to set the point when
the signal is output from
BALANCED OUT connector.
Set it to "POST" (pushed in) to output
the signal after the effects. Set it to
"PRE" (not pushed in) to output the
signal before the effects.
GROUND switch
Use this switch to connect or
disconnect the BALANCED OUT
connector with the ground. Set it to
"LIFT" (pushed in) to separate the
signal path from the grounding pin.
Set it to "CONNECT" (not pushed
in) to connect the grounding pin to
the ground.
the
5