Using The Looper - Zoom G5 Operation Manual

Using the Looper

1
To activate the Looper
• Press and hold
1
TIME
2
To set the recording time
• Turn
3
To adjust the tempo
• Turn
1 2 3
28
2 3 1
TEMPO
of Effect 1.
1 2 3
of Effect 2.
1 2 3
for a second.
2 3 1
LOOPER LEVEL
SETTING
Manual
Use the footswitch to start and stop recording.
Note mark
Set the recording time by setting the tempo and the number of
quarter notes.
NOTE
1 2 3
• The looper can record 1.5–60 seconds (30 seconds when UNDO is enabled).
• If the setting would not fall in this range, it will automatically be
adjusted.
• Changing the TIME setting will erase the currently recorded loop.
HINT
• You can also set the tempo using
• If no loop has been recorded yet, you can also set the tempo by tapping
NOTE
1 2 3
• The setting range is 40–250.
• Changing the tempo will erase the currently recorded loop.
• This tempo setting is used by every effect, rhythms and the looper.
2 3 1
RHYTHM LEVEL
1 2 3
.
1 2 3
2 3
1 2 3
.