Zoom G5 Operation Manual page 53

This effect produces the sound of a monophonic (single-note playing) guitar synthesizer
089 MonoSynth
that detects the pitch of the input signal.
Synth
Page01
Adjusts synthesizer sound level.
Wave
Page02
Sets waveform.
090 Z-Organ This effect simulates an organ sound.
Upper
Page01
Adjusts volume of high frequencies. Adjusts volume of low frequencies.
HPF
Page02
Adjusts high-pass filter cutoff frequency. Adjusts low-pass filter cutoff frequency. Adjusts the output level.
091 AutoPan This effect cyclically moves the panning position of the sound.
Rate
Page01
Sets the speed of the modulation.
Depth
Page02
Sets the depth of the modulation.
092 Rt Closet Simulates a rotary speaker.
Bal
Adjusts the balance between the
Page01
horn (high frequencies) and the drum
(low frequencies).
Drive
Page02
Adjusts the amount of amplification
from the preamp.
This long delay has a maximum length of 5000 mS.
093 Delay
Time
Page01
Sets the delay time.
HiDMP
Page02
Adjusts the treble attenuation of the
delay sound.
This effect simulates a tape echo. Changing the "Time"
094 TapeEcho
parameter changes the pitch of the echoes.
Time
Page01
Sets the delay time.
HiDMP
Page02
Adjusts the treble attenuation of the
delay sound.
095 ModDelay This delay effect allows the use of modulation.
Time
Page01
Sets the delay time.
Rate
Page02
Sets the speed of the modulation.
Knob1
0–100 P Dry
Adjusts level of original sound.
Sine, Tri, SawUp,
Tone
SawDn
Adjusts the tone.
Knob1
0–100 P Lower
0–10 LPF
Knob1
0 – 50 P Width
Sets the width of the panning.
0–10 P Clip
Adjusts the amount of waveform
clipping. Higher values emphasize
the auto-panning effect more.
Knob1
0–100 P Mode
Sets the rotary mode.
0–100
Knob1
1–5000 F .B
Adjusts the feedback amount.
0–10 P-P
Sets delay output to mono or ping-
pong.
Knob1
1–2000 P F .B
Adjusts the feedback amount.
0–10 Level
Adjusts the output level.
Knob1
1–2000 F .B
Adjusts the feedback amount.
1–50 P Level
Adjusts the output level.
Knob2
0–100 P Level
Adjusts the output level.
0–10 Speed
Adjusts smoothness of pitch change.
Knob2
0–100 P Dry
Adjusts level of original sound.
0–10 Level
Knob2
L50 – R50 P Level
Adjusts the output level.
0–10 P
Knob2
Slow,Fast P Level
Adjusts the output level.
FS
Knob2
0–100 P Mix
Adjusts the amount of effected sound
that is mixed with the original sound.
MONO, P-P Level
Adjusts the output level.
FS
Knob2
0–100 P Mix
Adjusts the amount of effected sound
that is mixed with the original sound.
0–150 P
FS
Knob2
0–100 P Mix
Adjusts the amount of effected sound
that is mixed with the original sound.
0–150
P
Knob3
0–150 P
0–100 P
Knob3
0–100 P
0–150 P
Knob3
0–150 P
Knob3
0–150 P
Hold, InputMute
Knob3
0–100 P
0–150 P
InputMute
Knob3
0–100 P
InputMute
Knob3
0–100 P
NEXT
53