Table of Contents
Advertisement
4.3
OSD/Areas
In main menu, turn joystick Up or Down to select OSD/AREAS. Turn joystick Left or Right to enter
OSD/AREAS sub-menu.
VIDEO SETTINGS
POSITIONS
OSD/AREAS
AUTO MODES
ALARM
PRIVATE ZONES
SYSTEM
INFO
EXIT
CAM. TITLE
Enter the title name for the camera, up to a maximum of 10 characters. Tilt the joystick up and down to
scroll through the characters, then tilt left or right to move to the previous/next position. When finished,
move the last digit and tilt the joystick right to return to previous screen.
AREAS
Press Enter key of keyboard or turn joystick Left/Right to enter AREAS sub-menu.
CAM. TITLE
AREAS
<┘
DIRECTIONS
<┘
DISPLAY
<┘
EXIT
In zone menu, you can set a zone and name it, when the speed dome turns to the zone you set, it will
display zone name on the screen (only if "OSD/AREAS->Display -> Zone" is set as "YES"). Tilt the joystick up
and down to scroll through the characters, then tilt left or right to move to the previous/next position.
When finished, tilt the joystick right to go to "Range" section, and press Enter key to enter Range
sub-menu. Use the joystick to move speed dome to its left position. Press IRIS+ key to save left position
setting and go to next step or press IRIS- to cancel.
EPTZ3602_ _
CAM. TITLE
AREAS
<┘
DIRECTIONS
<┘
DISPLAY
<┘
EXIT
ZONE
TITLE
RANGE
1. ----------------------------
2. ----------------------------
3. ----------------------------
4. ----------------------------
5. ----------------------------
6. ----------------------------
7. ----------------------------
8. ----------------------------
RETURN
26
EPTZ3602/3602i
EPTZ3602_ _
CLR
--------
[
]
<┘
<┘
--------
[
]
<┘
<┘
--------
[
]
<┘
<┘
--------
[
]
<┘
<┘
--------
[
]
<┘
<┘
--------
[
]
<┘
<┘
--------
[
]
<┘
<┘
--------
[
]
<┘
<┘
Advertisement
Table of Contents
