Installation - EverFocus Color Rugged Dome Camera EHD350 Operation Instructions Manual

Dimensions
Weight
Operating Temperature
Certifications
DIMENSIONS

INSTALLATION

1. Loosen the 4 fix screws on the housing cover by using the attached wrench (Figure 1).
Carefully uncap the housing cover as the direction shown below (Figure 2), please pay
attention not to damage the lens. To remove the housing cover, push the hinges to the
bottom of the bracket, the hinges can be easily removed from the bracket.
24VAC: 20.5VA max. (heater ON )
12VDC: 3.5W max. (heater OFF )
12VDC: 11W max. (heater ON )
130mm(W) x 98.8mm(H) x 130mm(D);
5.1"(W) x 3.9"(H) x 5.1"(D)
1.7kg ; 3.7lbs
-40°C~50°C ; -40°F~122°F (20%~80% Humidity)
FCC/CE
Figure 1
Figure 2
3