EverFocus Color Rugged Dome Camera EHD350 Operation Instructions Manual page 5

1/3” 560 tvl high resolution color rugged dome camera

Hide thumbs Also See for Color Rugged Dome Camera EHD350:

Table of Contents

2. Remove the camera.

Vari-Focal Lens

Heater

Locking Screws

Figure 3

To remove the camera, first unplug the wire connection on the back of the camera. Then

loosen the 2 locking screws on the camera base, push the camera base to the right (toward

heater direction, as shown in Figure 3), remove the camera from the mounting base.

Reinstall the camera and the cable while the base mounting is completed.

3. Mounting the base.

Side conduit entry

Conduit plug setscrew

Back conduit entry

Mounting Setscrew

Figure 4

Table of Contents

Show Quick Links

Table of Contents

Ehd350/h2 Ehd350/h3