Display Settings; Brightness, Contrast, Colour; Image Position Adjustment On Monitor - EverFocus EDR-1610A Installation & Operation Manual

8. DISPLAY SETTINGS

8.1. BRIGHTNESS, CONTRAST, COLOUR

Press SELECT to adjust brightness, contrast and colour for each video channel in full
screen mode of the respective camera (channel keys 1 ~ 9 resp. 1 ~ 16):
Press ENTER to switch between the settings and use the JOG to adjust the values on the
slidebars.
(1) BRIGHTNESS: Adjust the image brightness from 0 ~ 100%.
(2) CONTRAST:
(3) COLOUR:
The current value is indicated both on the slidebar and as percentage. Press MENU or
SELECT to leave the menu.

8.2 IMAGE POSITION ADJUSTMENT ON MONITOR

If the monitor display is not centre positioned, the horizontal and vertical image position
can be adjusted.
Press the ZOOM key in any multiscreen display (not full screen mode).
Use the JOG to horizontally centre the image position and press ENTER to switch to
vertical direction.
Further ZOOM key actuation switches the adjustment off.
Adjust the image contrast from 0 ~ 100%.
Adjust the colour saturation from 0 ~ 100%.
- 61 - EDR910_1610_ma_en_rev1 00
DISPLAY SETTINGS