Table of Contents
Advertisement
5.2 PLAYBACK SEARCH
SEARCH
SEARCH
Press the SEARCH key to enter the search menu.
NAVIGATION:
Use the JOG to select values or entries.
Use the ENTER key to go to the next menu item and the DISPLAY key to go to the
previous menu item.
Press the SELECT key to confirm a selection.
Press the MENU key to leave the search menu.
(1) TIME / DATE SEARCH
Select TIME/DATE in the first row of the search menu to enter the requested playback
position in the following rows.
The period available on the connected harddisks is indicated in the START/END TIME
field. Select the respective harddisk in the DISK NO field.
SEARCH MENU
METHOD
TIME / DATE
DATE
11-09-2005 FR
TIME
00:33:23
EVENT
A/M/V
DISK NO
01
SIZE(GB) °C
NO
01
152
42
The values in the EVENT row cannot be changed upon time/date search.
The bottom table further shows the total capacity of the used harddisk, its current
temperature and the timeframe of available recordings.
ATTENTION: When searching for a playback position just before current recording
position, it may occur that this position isn't available for playback yet (in case the
recording segment hasn't been closed yet). Playback then starts at the next possible
position.
START / END TIME
10-09-2005
07:33:23
14-09-2005
06:53:11
- 56 -
EDR910_1610_ma_en_rev1 00
Advertisement
Table of Contents
