Table of Contents
Advertisement
3.12 SYSTEM MENU
SYSTEM SETUP MENU
SYSTEM VERSION
SYSTEM VIDEO FORMAT
LOAD/SAVE CONFIGURATION
UPDATE SYSTEM SOFTWARE
LANGUAGE
QUICK PLAY
ON
SYSTEM PASSWORD ENABLE
PASSWORD
LEVEL-3
*************
LEVEL-2
*************
LEVEL-1
*************
Define the following settings in the SYSTEM menu:
(1) SYSTEM VERSION:
Display of the installed firmware version.
(2) SYSTEM VIDEO FORMAT:
Display of the detected video system PAL. The EDR automatically detects the video
system upon system startup.
(3) SAVE/LOAD CONFIGURATION:
Selecting YES opens a sub menu showing the following items (use the JOG for
selection):
(4) UPDATE SYSTEM SOFTWARE:
DVR update with latest firmware version through USB-stick or CF card. At first, place the
CF card or the USB stick into the respective interface.
YES:
ATTENTION: 1. Before starting the update, stop the recording process.
2. Do not switch the DVR off while update is run.
3. Do not remove CF card or USB stick while update is run.
NO:
ATTENTION: After updating the system, restart, loading of default settings and further
restart are required. Furthermore, HDD should be deleted.
V1.00
PAL
NO
NO
ENGLISH
10 MINUTES AGO
NO
RIGHTS
ADMINISTRATOR
OPERATOR
GENERAL
CANCEL:
DEFAULT:
SAVE:
LOAD:
After confirmation with SELECT, the firmware update is run.
Update is carried out in 3 phases (display at bottom screen
margin) and can take up to 5 minutes.
Cancel, return to SYSTEM menu
- 50 -
Return to system menu
Load default setting after security request
YES/NO
ATTENTION: The network settings remain
stored despite loading default setting!
Save the current configuration to CF card /
USB stick.
Load a configuration from CF card / USB
stick.
EDR910_1610_ma_en_rev1 00
Advertisement
Table of Contents
