Table of Contents
Advertisement
3.4 ALARM MENU
ALARM
ALARM 1
ALARM
ALARM 2
ALARM TYPE
ALARM 3
ALARM 4
ACTIVE CAMERA 01
DURATION
ALARM 5
ALARM OUTPUT
ALARM 6
ALARM EMAIL
ALARM 7
ALARM 8
BUZZER
ALARM NETWORK NO
ALARM 9
SUMMARY
MAIN MON
CALL MON
Menu display for EDR-910, EDR1610 identical, but with 16 alarm inputs.
Define the dry alarm contacts' attributes and the alarm reactions in the ALARM menu.
For alarm contact pin assignment, please refer to appendix D.
Each contact is adjusted individually and selected from the list on the left:
(1) ALARM:
(2) ALARM TYPE:
(3) ACTIVE CAMERA:
Alarm camera being recorded and displayed in full screen on the main monitor (see (10)
MAIN MONITOR). Recording is carried out according to the settings defined for EVENT
within the CAMERA menu.
COPY function
Alarm settings can be copied from one contact to another. Select the contact to be copied
from the contact list on the left and press the COPY key. The message "COPIED" appears
at the top screen margin. Select the contact which shall apply the settings from the
contact list. Press the SEARCH key to assign the copied settings to the contact. The
message "PASTED" appears at the top screen margin
ENABLE
N.O.
05 SEC
NONE
NO
OFF
NO CHANGE
NO CHANGE
ENABLE:
Contact is activated.
DISABLE:
Contact is deactivated.
N.O.:
Normally open, contact reacts on being
connected to ground (GND). Define the
alarm duration within menu item
DURATION.
N.C.:
Normally closed, contact reacts on being
disconnected from ground (GND). Define
the alarm duration within menu item
DURATION.
N.O.+Trans
Transparent mode, similar to normally open
but: alarm is active as long as input contact
(but minimal as defined in DURATION)
N.C.+Trans
Transparent mode, similar to normally closed
but: alarm is active as long as input contact
(but minimal as defined in DURATION)
- 31 -
EDR910_1610_ma_en_rev1 00
Advertisement
Table of Contents
