Table of Contents
Advertisement
(1) PROTOCOL: Network alarm transmission protocol type
(2) PORT :
Network port through which the alarm is transmitted. This port must be set at the client's
side (recipiant) correspondingly.
(3) UNIQUE ID: DVR ID number, used for identification by the recipiant's software.
The unique ID appears also in the subject line of alarm emails.
(4) SERVER 1 : Alarm server 1 IP address (recipiant)
(5) SERVER 2 : Alarm server 2 IP address (recipiant)
(6) SERVER 3 : Alarm server 3 IP address (recipiant)
TCP:
UDP:
- 39 -
TCP protocol transmission
UDP protocol transmission
EDR910_1610_ma_en_rev1 00
Advertisement
Table of Contents
