Using Function Button - Panasonic TH-65VX300U Operating Instructions Manual

Using FUNCTION button

Assigning functions to the FUNCTION button on the remote control enables a user to switch between
show/hide and modes with just a single touch of a button. The function settings are con¿ gured by
using "FUNCTION BUTTON SETTINGS" in the SETUP menu (see page 57). The button functions are
con¿ gured in two ways depending on the setting (On/Off) of "Studio mode" in the OPTIONS menu.
The factory preset functions are as described below.
FUNCTION 1 Button: 3D SETTINGS
FUNCTION 2 Button: SIGNAL
FUNCTION 3 Button: COLOUR GAMUT
FUNCTION 4 Button: SCROLLING BAR
Display of the FUNCTION button guide
Pressing the FUNCTION button can display the FUNCTION button guide to refer for the function of
each button.
FUNCTION
1: 3D SETTINGS
If the guide display is not needed, set "FUNCTION BUTTON GUIDE" in "FUNCTION BUTTON SETTINGS" to "OFF"
(see page 57).
3D SETTINGS / SIGNAL / COLOUR GAMUT
SCROLLING BAR / TEST PATTERNS
• SCROLLING BAR
Activates the SCROLLING BAR ONLY screensaver.
After 15 minutes, the display enters standby mode.
To exit this mode, press any button.
Note:
PC POWER MANAGEMENT and NO SIGNAL POWER OFF are deactivated during SCROLLING BAR or TEST PATTERNS
operation. (see page 43)
62
2: SIGNAL 3: COLOR GAMUT
Menu is displayed.
(Example: 3D SETTINGS)
3D SETTINGS
3D FUNTION ON
3D INPUT FORMAT AUTO
3D VIEWING MODE 3D
LEFT/RIGHT SWAP NORMAL
3D COLOR COMPENSATION
ON
SAFETY PRECAUTIONS
Pressing the FUNCTION button clears the menu.
Con¿ rmation screen (Example: SCROLLING BAR)
FUNCTION
SCROLLING BAR
YES N O
The operation starts.
4: SCROLLING BAR
Press to
select
The operation starts.
"YES".
Press.
• TEST PATTERNS
Each time you press
(seven in all).
Color Bars
Black 1% window
To exit this mode, press any button other than
, a different test pattern is displayed
Red Green
Frame
(2 lines × 2 dots) Blue
.