Setup Of Screensaver Time - Panasonic TH-65VX300U Operating Instructions Manual

3

Setup of SCREENSAVER Time

After selecting TIME OF DAY, INTERVAL or STANDBY AFTER SCR SAVER, the relevant Time Setup will become
available for selection and the Operating Time may be set. (Time cannot be set when "MODE" is "ON" or "OFF".)
SCREENSAVER
START
FUNCTION NEGATIVE IMAGE
MODE TIME OF DAY
START TIME
FINISH TIME
SCREENSAVER
START
FUNCTION NEGATIVE IMAGE
MODE INTERVAL
SHOW DURATION
SAVER DURATION
SCREENSAVER
START
FUNCTION NEGATIVE IMAGE
MODE STANDBY AFTER SCR SAVER
SCREENSAVER DURATION
4 START setting
Select "START".
SCREENSAVER
START
FUNCTION NEGATIVE IMAGE
MODE
TIME 15:00
6:15
Notes:
12:30
• Pressing " " or " " button once changes the Time 1 minute.
[However, switching occurs every 15 minutes when Periodic Time is selected.]
• Pressing " " or " " button continuously changes the Time by 15 minutes.
TIME 15:00
• "SCREENSAVER DURATION" of the "STANDBY AFTER SCR SAVER" can
be set from 0:00 to 23:59. When this is set to "0:00", "STANDBY AFTER SCR
SAVER" will not be activated.
Note: Timer function will not work unless "DAY/TIME SETUP" is set.
12:00
3:00
TIME 15:00
6:15
TIME 15:00
ON
The menu screen will disappear and the SCREENSAVER will be activated.
To stop the SCREENSAVER under ON, press the R button or any buttons
on the main unit.
Note: When the display is turned off, the SCREENSAVER will be deactivated.
change
2
1 select
set
2
1 select
SETUP menu
53