Selecting The Input Signal - Panasonic TH-65VX300U Operating Instructions Manual

Selecting the input signal

INPUT
COMPONENT
HDMI1
HDMI2
PC
When an optional Terminal Board is installed:
INPUT
SLOT INPUT
COMPONENT
HDMI1
HDMI2
PC
Using dedicated buttons for input selection
Press to select HDMI signal terminals in HDMI 1 or HDMI 2.
Press to select component or RGB signal terminal in COMPONENT/RGB IN.
Press to select PC signal terminal in PC IN.
Press to select Input terminal in Terminal Board.
For dual input Terminal Board, you can select either input terminal
using A or B button.
Notes:
• Selecting is also possible by pressing the INPUT button on the unit.
• Select to match the signals from the source connected to the component/
RGB input terminals. (see page 41)
• Image retention (image lag) may occur on the plasma display panel
when a still picture is kept on the panel for an extended period. The
function that darkens the screen slightly is activated to prevent image
retention (see page 69), but this function is not the perfect solution to
image retention.
18
Press to select the input signal to be played back from the equipment
which has been connected to the Plasma Display.
Component or RGB input terminal in COMPONENT/RGB IN.*
HDMI input terminals in HDMI 1 to HDMI 2.
PC input terminal in PC IN.
* "COMPONENT" may be displayed as "RGB" depending on the
setting of "COMPONENT/RGB-IN SELECT". (see page 41)
Input terminal in Terminal Board
When a dual input Terminal Board is installed, "SLOT INPUT A" and "SLOT INPUT B" are
displayed.
INPUT MENU ENTER/
INPUT MENU ENTER/