Sound Adjustment; Sdi Sound Output - Panasonic TH-65VX300U Operating Instructions Manual

SOUND Adjustment

1
Display the menu screen.
2
Select "SOUND".
PICTURE
SETUP
POS. /SIZE
SOUND
3
Select the item and set.
NORMALIZE
AUDIO MENU
BASS
MID
TREBLE
BALANCE
SURROUND
VOLUME 1
4
Exit the menu.
Item
AUDIO MENU
BASS
MID
TREBLE
BALANCE
SURROUND
VOLUME
Note: BASS, MID, TREBLE and SURROUND settings are memorized separately for each AUDIO MENU.
Helpful Hint (
NORMALIZE
While the "SOUND" menu is displayed, if the OK button is pressed during "NORMALIZE", then all adjustment values
are returned to the factory settings.

SDI SOUND OUTPUT

This menu is available only when selecting a slot that any of the following terminal boards is installed:
HD-SDI Terminal Board with audio (TY-FB10HD), Dual Link HD-SDI Terminal Board (TY-FB11DHD), or Dual HD-SDI
Terminal Board for 3D (TY-FB30DHD3D)
SDI SOUND OUTPUT
LEFT CHANNEL
RIGHT CHANNEL
SOUND OUT
LEVEL METER
40
STANDARD
0
0
0
0
OFF
STANDARD: Emits the original sound.
DYNAMIC: Accentuates sharp sound.
CLEAR: Attenuates human voice.
Adjusts low pitch sounds.
Adjusts normal sounds.
Adjusts high pitch sound.
Adjusts left and right volumes.
Select ON or OFF.
Adjust the sound volume level.
Normalization)
2/2
CHANNEL 1
CHANNEL 2
ON
OFF
access
2
select
1
adjust
2
select
1
Details
Item
CHANNEL 1 to CHANNEL 16
LEFT CHANNEL
Selects left audio channel.
CHANNEL 1 to CHANNEL 16
RIGHT CHANNEL
Selects right audio channel.
ON
SOUND OUT
ON: Enables audio output.
OFF: Disables audio output.
OFF
Sets audio channels to show in the audio level meter.
8 channels are displayed in the audio level meter; 4
LEVEL METER
channels each on both right and left sides of the display.
OFF:
1-8CH: Displays the audio level meter (1-8ch)
9-16CH: Displays the audio level meter (9-16ch)
Details
OFF
1-8CH 9-16CH
Hides the audio level meter.