Rgb/Mono Settings - Panasonic TH-65VX300U Operating Instructions Manual

RGB/MONO SETTINGS

Turn off R, G, B signals to adjust the image.
3D SETTINGS
SIGNAL
WAVEFORM MONITOR
MARKER SETTINGS
RGB/MONO SETTINGS
SCREENSAVER
EXTENDED LIFE SETTINGS
INPUT LABEL
FUNCTION BUTTON SETTINGS
ON/OFF TIMER SETUP
DAY/TIME SETUP
NETWORK SETUP
1
Select mode by "MODE SELECT".
RGB/MONO SETTINGS
MODE SELECT
R ON/OFF
G ON/OFF
B ON/OFF
RGB: Displays with one of red, green and blue signals cut.
BLUE ONLY: Displays in solid blue.
MONO: Only Y signal is used for black and white displays.
2
Con¿ gure each mode setting.
For RGB mode
RGB/MONO SETTINGS
MODE SELECT
R ON/OFF
G ON/OFF
B ON/OFF
• R ON/OFF, G ON/OFF, B ON/OFF
OFF ON
ON: The red (for "R ON/OFF"), green (for "G ON/OFF") or blue (for "B ON/OFF") signal is on.
OFF: The red (for "R ON/OFF"), green (for "G ON/OFF") or blue (for "B ON/OFF") signal is cut.
For BLUE ONLY mode
RGB/MONO SETTINGS
MODE SELECT
BLUE ONLY
• BLUE ONLY
OFF ON
ON: The BLUE ONLY mode is enabled.
OFF: The BLUE ONLY mode is disabled
The RGB/MONO SETTINGS function is also enabled/disabled with the FUNCTION button on the remote control (see
page 63).
PC
FULL
NANODRIFT
R OFF
Note:
With MONO set, the color adjustment in the PICTURE menu is not available.
When the setting of each item is enabled, the item being currently set to 'Enable' becomes disabled.
access
2
select
1
RGB
ON
ON
ON
RGB
ON
ON
ON
BLUE ONLY
ON
When the function is enabled, selected mode is displayed.
RGB/MONO SETTINGS
MODE SELECT
R ON/OFF
G ON/OFF
B ON/OFF
change
2
select
1
change
2
1 select
For MONO mode
RGB/MONO SETTINGS
MODE SELECT
MONO
• MONO
OFF ON
ON: The MONO mode is enabled.
OFF: The MONO mode is disabled
SETUP menu
RGB
ON
ON
ON
MONO
ON
51