Function Button Settings - Panasonic TH-75EQ1W Operating Instructions Manual

■
[Auto display operation guide]
When this is set to [On], the operation guide is
automatically displayed at the beginning of the content
playback, and the information is automatically erased
after a certain period of time.
The playback control (see page 107) is performed only
while the operation guide is being displayed. If it is not
displayed, the unit shows the operation guide without
performing the playback control.
When this is set to [Off], the operation guide is not
displayed at the beginning of the content playback. The
playback control is performed regardless of Show/Hide
of the operation guide.
Note
●
When [Play method] is set to [Single], playback
information and operation guide are automatically
displayed only at the beginning of the first playback
of content.
●
When [Play method] is [Select] or [Program], up to 99
files can be selected.
●
This menu will be greyed out and cannot be set while
content is being played.

Function button settings

Assigns specific functions to the numeric buttons (<1>
to <6>). The buttons can be used as shortcut keys by
assigning frequently used operations.
1
Switch [Function group] with
[Function button settings] - submenu screen
Function button settings
Function group
Function button 1
Function button 2
Function button 3
Function button 4
Function button 5
Function button 6
Function button guide
2
Select the numeric button with
and set the function to assign with
.
Functions assignable to the numeric
buttons
[Input] (Direct input select)
Input can be selected with single-touch operation.
[HDMI1] / [HDMI2] / [DVI-D] / [PC] / [PC[YP
[VIDEO] / [USB] / [MEMORY VIEWER]
[Memory load]
Memory can be loaded with single-touch operation.
Refer to "Memory load". (see page 46)
[MEMORY1] to [MEMORY6]
●
[MEMORY1] to [MEMORY6] load functions are
already assigned to <1> to <6> respectively.
These settings cannot be changed.
70
English
Input
Input
HDMI1
HDMI2
Memory load
DVI-D
PC
USB
Shortcut
MEMORY VIEWER
On
[Shortcut]
[Signal], [Screensaver], [Set up timer], [Power
management settings], [Network settings],
[Multi display settings]
● Pressing the numeric button displays the menu
screen. Pressing the button again exits the
menu screen.
[AV mute]
●
Pressing the numeric button mutes the audio
and pictures.
To cancel, press any button on the remote
control except the <Standby (ON/OFF) button>.
[Digital zoom]
● Switches to [Digital zoom] mode by pressing
numeric buttons. (see page 36)
[Display ID / Display name]
● Pressing the numeric button enlarges [Display
ID] and [Display name].
[HDMI-CEC operation]
●
Press the numeric buttons to display the
operation screen of the HDMI-CEC compatible
device.
[Playlist edit]
●
Pressing the numeric button displays [Playlist
edit] screen. (see page 100)
Shipping condition
The following functions are assigned to the numeric
.
buttons as factory default.
1 HDMI1
↓
2 HDMI2
3 DVI-D
↓
4 PC
5 USB
MEMORY
6
VIEWER
■
[Function button guide]
Sets the function display when numeric buttons are
pressed. Set this for each function group.
[On]:
Displays the function list for the numeric buttons.
[Off]:
P ]] /
B R
Does not display the function list. Operation starts
when numeric buttons are pressed.
Note
●
When <FUNCTION> is pressed, [Function button
guide] will be displayed regardless of the [On] / [Off]
settings.
[Memory
[Input]
load]
MEMORY1
MEMORY2
MEMORY3
MEMORY4
MEMORY5
MEMORY6
[Shortcut]
[Signal]
[Screensaver]
[Set up timer]
[Network
settings]
[AV mute]
[HDMI-CEC
operation]